Maxima Guillotine Knife Replacement Blades
Replacement knives for Maxima paper cutters, ground in W18Cr4V (T1) or W6Mo5Cr4V2 (M2) at HRC 60–64. The 106 and the 115 do not share a blade: different length, different body width, different thickness.
Maxima models and sizes we grind
| Model | Size L × W × T (mm) | Size (inch) | Notes |
|---|---|---|---|
| 106 | 1252 × 140 × 10 | 49.29 × 5.51 × 0.39 | 140 mm body, 10 mm thick |
| 115 | 1320 × 150 × 12 | 51.97 × 5.91 × 0.47 | 150 mm body, 12 mm thick — no interchange with the 106 |
The 106 and 115 take different blades in every dimension
| Maxima 106 | Maxima 115 | Difference | |
|---|---|---|---|
| Length | 1252 mm | 1320 mm | 68 mm |
| Body width | 140 mm | 150 mm | 10 mm |
| Thickness | 10 mm | 12 mm | 2 mm |
Not one of the three dimensions matches, so there is nothing to trim or shim into place. If the model plate is missing, measure the old blade: length along the edge, width across the body, thickness at the top of the spine where the clamp grips.
Custom Maxima blades
from 1 pcMaxima cutters are sold under several names in different markets, and the same model number sometimes carries a different clamp. Send the old blade or the measured dimensions and we confirm the body before grinding.
| What we can change | Options |
|---|---|
| Length | Any length to your drawing |
| Width | 90–160 mm |
| Thickness | 9.7 / 10 / 11.7 / 12 / 12.7 / 13.7 / 13.75 mm, or to your value |
| Hole pattern | To drawing or sample |
| Steel | T1 / M2, HRC 60–64 |
| Order size | 1 piece for a trial |
Frequently asked
Will a Maxima 106 blade fit a 115?
No. The 106 blade is 1252 × 140 × 10 mm and the 115 is 1320 × 150 × 12 mm. Length, width and thickness all differ.
What is the minimum order?
One piece. Most buyers take a single blade first to check the fit and the edge, then order a matched set for the whole shop.
How long does delivery take?
Common sizes about 7 days; a new drawing 15–25 days after you approve it. Blades ship in wooden cases with export documentation.
Polar · Wohlenberg · Perfecta · Schneider · Itoh
Full size chart by machine brand
Related reading: T1 vs M2: choosing the steel · Why guillotine blades chip
Brand names are used only to describe machine compatibility. We are not affiliated with, or an authorised distributor of, any of these manufacturers.
Send your Maxima model and the size on the old blade
You get a size confirmation, price and lead time within 24 hours. One piece is enough to start.
Send an Inquiry